TECHNOVACUUM

NEW TECHNOLOGY RESEARCH INNOVATION

 		 Vacuum creating systems

1) based on vacuum hydrocirculating units

2) based on steam ejectors

Jet compression units
for flare and low-pressure gases recovery

1) based on two-phase jet devices

2) based on steam ejectors

 
Jet absorption gas cleaning units
for hydrocarbons removal from breathing gases and oil and petroleum products gases recovery

 
Jet devices
ejectors and injectors for various purposes






Technovacuum Ltd.
+7 (495) 956-76-21
+7 (499) 261-99-98
+7 (499) 267-82-03
Russia, 105082, Moscow
B.Pochtovaya str., 26 "B", build.2, 5-th floor, office 1, room 11A 		 

Questionnaire
for preparation of technical proposal for delivery of jet absorption gas cleaning unit for tank breathing gases

Company
Name
Address
Phone
Fax
E-mail
Technical proposal preparation period (minimum 2 weeks):
1. Purpose of works:

delivery of the jet absorption gas cleaning unit for a new tanks,
delivery of the jet absorption gas cleaning unit for the existing tanks.

2. Purpose of process unit being a source of gases for sweetening:
3. Characteristics of vapor pumped by the jet absorption gas cleaning unit*:

* When data about pumped vapor are not available, please fill in the items 4.1-4.8.

3.1 Flowrate of pumped vapor: kg/hr

within the range from % up to %

3.2 Composition of pumped vapor (Concentration in %mass, %mol):
Chemical formula
 Concentration
 Mol. weight
 
Chemical formula
 Concentration
 Mol. weight

3.3 Maximum temperature in the tank - °C.

3.4 Minimum set pressure of vent valves - Atm. abs.

3.5 Maximum set pressure of vent valves - Atm. abs.

 

4. Characteristics of products contained in the tanks:

(for gasolines, please indicate a brand instead of p. 4.1-4.4)

4.1 Assay of crude oil contained in the tanks (TBP) with indication of gas composition up to Ń5 inclusive:

Chemical formula
 Concentration
 Mol. weight
 
Chemical formula
 Concentration
 Mol. weight
 
Chemical formula
 Concentration
 Mol. weight

4.2 Temperature of crude oil delivered to the unit - °C.

4.3 Density at 20°C - kg/m3.

4.4 Viscosity at 20°C - sSt.

4.5 Minimum oil flowrate for filling the tanks equipped with the jet absorption gas cleaning unit (indicate the pump brand) - m3/hr.

4.6 Maximum gas flowrate pumped out of the tanks equipped with the jet absorption gas cleaning unit (indicate the pump brand) - m3/hr.

4.7 Number and volume of tanks for each kind of product:

(Please, indicate separately any pontoons, floating roofs, etc.)


5. Characteristics of energy resources:

5.1 Electricity

5.1.1 Voltage - V,

5.1.2 Current frequency - Hz,

5.1.3 Number of phases - .



By filling in this Questionnaire I agree with handling of my personal data in compliance with the Federal law No. 152-FZ of 27.07.2006 (edition of 29.07.2017) “About Personal Data” on conditions and for purposes determined by policy of confidentiality.

  

 

Download Questionnaire (for MSWord).


 




Technovacuum © 2024